FFLOB5 Floorbrite - Buffable Floor Polish, All Floor Types
- More Info
- Product Data
- Quick Postage Guide
Hard wearing, buffable emulsion floor polish manufactured from high quality polymers, wax and resin. Provides a scuff and slip retardant finish with a good initial gloss, which can be enhanced by machine burnishing. It has good levelling properties, making it easy to apply and recoat.
Available in all quantities and pack sizes - Please see options below:
BENEFITS & FEATURES
*Based on high grade acrylic polymers
*Protects against water spotting and spillage
*Scuff and slip retardant
*Simply removed using FLOOR STRIPPER
*Easily applied and maintained
WHERE TO USE
On all clean, dry, floor surfaces including vinyl, thermoplastic, rubber, linoleum, composition, asphalt, terrazzo, marble, sealed wood, sealed cork and sealed concrete. Dependent upon the porosity of the surface, the coverage rate is approximately 400-500 sq. metres for one coat
HOW TO USE
Thoroughly clean floor and allow to dry before applying polish. If the old polish has been stripped, the floor may require neutralising with dilute acetic acid (vinegar) – 2 tablespoons per 5ltr water. Apply a thin coat with clean mop or applicator. When dry, apply a second coat and again allow to dry. A third coat may be required on old or worn floors. FLOORBRITE will dry to a high gloss, but machine burnishing will enhance the appearance, durability and slip resistance.
MAINTENANCE: For a period of 24 hours after application of FLOORBRITE, the floor surface should only be swept or damp mopped, thereafter routine maintenance should be carried out, as recommended: -
A) Damp mop using GP DETERGENT or a suitable neutral detergent.
B) Damp mop with a solution of 1:8 FLOORBRITE. When dry, machine buff.
C) Remove dust by mop sweeping and spray clean using FLOORBRITE at a dilution of 1:50 or, alternatively use a floor gel.
Contains an aqueous dispersion of acrylic co-polymers, wax emulsion, ammonia soluble resin, plasticisers, coalescent, surfactant, defoamer, levelling agent and preservative.
TYPICAL PRODUCT ANALYSIS
Appearance: - Thin Emulsion
Colour: - White
Odour: - Faint acrylic/ammonia
pH Value – undiluted: - 8.5
Specific Gravity (20°C): - 1.01
Viscosity @ 20°C Flow Cup 4: - As water
Non-Volatile Content w/w: - 13.5%
Total Ingredient Content w/w: - 14.6%
Biodegradable: - N/A
Shelf Life Unopened: - 3 Years
Can be delivered in any amount anywhere in the UK.
|Product Type||Shipping Cost||Details|
|UK Mainland - Non Hazardous Package||£8.00||Delivery to mainland UK only - Up to 25kg on Non Hazardous Products|
|UK Mainland - Hazardous Package||£9.50 to £12.00
Delivery to mainland UK only - Up to 25kg on Hazardous Products. Prices From £9.50-£12 (area dependant) Click Here For Chart
|UK Mainland - Non Hazardous Pallet||£35.00||
Delivery to mainland UK only - Up to 1000 kg on Non Hazardous Products (1000 Litre IBC's, 205 litre Drums, 32 x 25 Litre etc)
|UK Mainland - Hazardous Pallet||
Delivery to mainland UK only - Up to 1000 kg on Hazardous Products (1000 Litre IBC's, 205 litre Drums, 32 x 25 Litre etc) -Prices From £24 -£70 (area dependant) Click Here For Chart
Non Hazardous Shipping Rates For Most European Destinations
|PLEASE ENSURE THAT YOU LEAVE A VALID CONTACT NUMBER (PRFERERABLY MOBILE) WHEN PLACING AN ORDER - REDELIVERY CHARGES MAY APPLY AFTER ANY FAILED ATTEMPTS|