Hansa Care 1050 - Polyether modified polysiloxane

LARGER SIZES AVAILABLE ON REQUEST - PLEASE CONTACT FOR PRICING
 
®HANSA CARE 1050 
Character
Wetting agent - levelling agent 
Chemical character
Polyether modified polysiloxane 
Appearance
Slightly yellow 
Solid content
Approx. 100 % 
Ionic character
Non ionic 
Viscosity (25° C) 
Approx. 25 mPa·s 
Cloud point (1 % in H2O) 
10° C 
Density (15° C) 
1.018 mg/cm³ 
Flash point
> 100° C
Surface tension (25° C) 
100      %:   23.2 mN·m-1       0.01 % in H2O: 27.5 mN·m-1 
Storage life In closed containers at room temperature (approx. 20° C) for at least 12 months. 
The product is not sensitive to frost. 
 
The above given values are product describing data. Please consult the 'delivery specification' for binding product specifications. Further data about product properties, toxicological, ecological data as well as data relevant to safety can be found in the safety data sheet.
 
Properties 
• Very good wetting effect
• High surface activity
• Improves the adherence of coatings 
 
Application technique 
Diluting instruction 
HANSA CARE 1050 is soluble in water and all polar solvents.  
 
Application fields 
HANSA CARE 1050 is suitable as wetting agent for substrates which are difficult to wet. 

Application proposal 
Due to the non ionic character of HANSA CARE 1050 it can be used in combination with mostly all common finishing products. 

Due to its marked surface active properties even polar and non polar surfaces, for example polyethylene, polyvinylchoride or siliconised materials may be easily wetted by aqueous systems. It is possible to reduce the surface tension of many organic media by the addition of HANSA CARE 1050. This will improve the adhesion of polar sizing agents, adhesives or coatings.